Far End Camera Control; About Far End Camera Control - Cisco TelePresence SX10 User Manual

Camera Control

Far end Camera Control

1
Navigate to Participants in the upper right corner and press OK
on the remote control.
3
To control the far end camera navigate to Camera (number two
from the right) and click OK on the remote control.
D1509712 User Guide
Cisco TelePresence SX10, SX20
Produced: June 2017 for CE9.1
All contents © 2010–2017
Cisco Systems, Inc. All rights reserved.
2
A menu showing a list of the participants in the call will now appear.
Navigate to the participant, whose camera you want to control and
press OK on the remote control. A submenu will now appear.
4
Adjust Pan, Tilt and Zoom as per your liking. Use OK or Back on the
remote control to exit.
About Far End
Camera Control
Many video systems have a
remotely controllable camera. Such
systems allow you to use a remote
control to change pan, tilt, and
zoom.
If the far end (those you are in a
meeting with) have such a system,
you may be able to control their
camera during the call.
34