Advertisement
INSTALLATION (SCP-3371/SNP-5300 SERIES)
7.
Camera Cable Arrangement and Hinged Door Close
Connect the cable to the terminal block on the hinged door. Please
refer to 'Camera Cabling Diagram' in the installation manual.
After cabling, please close the hinged door.
Camera Installation
8.
Insert the fi xing bracket into the camera bezel. Connect the safety cable fi rst, and then
assemble the camera. The safety cable is wound around the install base like a spring. Pull
from the install base as shown in the fi gure below to mount onto the hook of the safety cable.
After mounting the install base as shown in the fi gure, turn the unit in a clockwise direction.
After turning the unit, connect the screw on the fi xing bracket to the lower bracket.
※ To attach the camera to the mount, refer to the alignment guide marks as shown in the
fi gure.
16_ SHP-3701F
Alignment
Direction Guides
Alignment
Direction Guides
Alignment Directions
Advertisement
