Advertisement
INSTALLATION (SCP-3370/SNP-5200 SERIES)
8.
Installing the camera
Install the camera in the arrow direction as shown. Connect the SAFETY WIRE before
installing the camera.
The SAFETY WIRE is of the spring type that is locked on the INSTALL BASE. As shown in
the left fi gure, pull up the wire from the INSTALL BASE to hook it to the SAFETY WIRE hook.
When attaching the camera to the mount, check the arrow directions in the fi gure below before proceeding.
SAFETY WIRE
9.
Remove the dome cover from the camera, and install the cover onto the HOUSING.
Fit the corner groove of the cover into one of 4 grooves on the HOUSING before fi xing it.
Installing the camera without removing the dome cover will cause an image out of focus.
12_ SHP-3701F
Groove
홈
Groove
Cover
홈
커버
Arrow Mark
Arrow Mark
Check the
arrow head
Groove
홈
HOUSING
하우징
Groove
홈
When working on the network PTZ camera,
arrange the network cables through the bottom
hole of the HOUSING.
Advertisement
