Advertisement
5.
Push the HOUSING inside the CEILING through the CEILING hole, and tighten the
SCREWs (x2) clockwise to fi x the HOUSING on the CEILING.
(The BRACKET will be positioned from <A> to <B> as shown.)
M
Ensure that the HOUSING is fi rmly secured to the CEILING BOARD.
BRACKET
브라켓
Turn clockwise
시계방향으로 회전
6.
Arrange camera cables and close the hinge door
Connect the cables to the terminal block on the hinge door.
For details, refer to "Camera Wiring" of the camera's
installation manual.
When done, close the hinge door.
7.
DIP Switch Setting
On the bottom of the camera unit, there are
located one DIP switch for communications
and another DIP switch for ID setting. For
more information, refer to the camera's
installation manual.
HOUSING
하우징
BRACKET
브라켓
스크류
SCREW
BRACKET
브라켓
BRACKET
브라켓
<A상태>
<A>
<B상태>
Protocol(SW2)
<B>
ID(SW1)
SHP-3701F _11
Advertisement
