Onkyo TX-NR474 Instruction Manual page 79

> Before Start > Part Names
Compatible input resolutions
HDMI input
4K, 1080p/24, 1080p, 1080i, 720p, 480p/576p
Composite input
480i/576i
0 The output from the HDMI OUT jack to the TV is the
same resolution as the input.
Audio Inputs
Digital
OPTICAL IN1 (CD), IN2 (TV)
COAXIAL IN (CBL/SAT)
Analog
IN1 (GAME), IN2 (PC), IN3 (CD), AUX (Front, Ø 3.5 mm)
Audio Outputs
Analog
SUBWOOFER PRE OUT
Speaker Outputs
FRONT L/R, CENTER, SURROUND or HEIGHT L/R
Phones
PHONES (Front, Ø 6.3 mm)
Others
USB: 1 (Rear, Ver.2.0, 5 V/1 A)
Ethernet: 1
Setup Mic: 1 (Front)
Power consumption in standby mode
In the following cases, the power consumption in standby
mode may reach up to a maximum of 12 W:
– When "Network Standby" is set to "On"
– When "HDMI CEC" is set to "On"
– When "HDMI Standby Through" is set to other than "Off"
– When "Bluetooth Wakeup" is set to "On"
– When "USB Power Out at Standby" is set to "On"
> Install > Initial Setup > Playback
Advanced Setup | Supplementary Information | Others
79
En