Onkyo TX-NR474 Instruction Manual page 7

> Before Start > Part Names










> Install
Remote Controller
1. Í ON/STANDBY button
2. Input selector buttons: Switches the input to be played.
3. Q (QUICK MENU) button: Settings such as "Tone" and
"Level" can be made quickly during play on the TV screen
(P66).
4. Cursors, ENTER button: Select the item with the cursors and
press ENTER to confirm. When the folder or file lists are not

shown on one screen on the TV, press
screen.
5. button: You can show advanced setting items on the TV

and display to provide you with an even better experience
(P52).
6. Volume buttons
7. button: Temporarily mutes audio. Press again to cancel
muting.
8. LISTENING MODE buttons: Select listening modes (P35).
9. Play button: Used for play operations when playing Music
 Server or USB.
10. button: Used for repeat or random play operations
when playing Music Server or USB. Each time you press the
button, the mode switches from
(folder repeat), to (random).
CLEAR button: Deletes all characters you have entered
when entering text on the TV screen.
11. DIMMER button: You can adjust the brightness of the display
in three steps. It cannot be turned off completely.
12. button: Switches the information on the display and is
used to operate RDS (P30).
13. button: Returns the display to the previous state during
setting.
14.MODE button: Switches tuning to an AM/FM station between
 automatic tuning and manual tuning.
15.MEMORY button: Used to register AM/FM radio stations.

0 MAIN and ZONE buttons are not used.
> Initial Setup > Playback
/ to change the
(1-track repeat), to
Advanced Setup | Supplementary Information | Others
7
En