Commonly Used Operational Mode Commands; Table 6: Commonly Used Operational Mode Commands - Juniper EX9200 Features Manual

VPLS Feature Guide for EX9200 Switches

Table 6: Commonly Used Operational Mode Commands

Items to Check
Software version
170
—Display the current configuration and information about interfaces, routing
show
protocols, routing tables, routing policy filters, system alarms, and the chassis.
test —Test the configuration and application of policy filters and autonomous system
(AS) path regular expressions.
—Trace the route to a remote network host.
traceroute
Commands for connecting to other network systems—The
Shell connections, and the
the network. For information about these commands, see the
Commands for copying files—The
the router or switch to another, from the router or switch to a remote system, or from
a remote system to the router or switch. For information about these commands, see
the .
CLI Explorer
Commands for restarting software processes—The commands in the
restart the various Junos OS processes, including the routing protocol, interface, and
SNMP. For information about these commands, see the
A command— —for performing system-level operations, including stopping and
request
rebooting the router or switch and loading Junos OS images. For information about
this command, see the CLI Explorer
A command— —to exit the CLI and start a UNIX shell. For information about this
start
command, see the CLI Explorer
A command— —for entering configuration mode, which provides a series of
configure
commands that configure Junos OS, including the routing protocols, interfaces, network
management, and user access. For information about the CLI configuration commands,
see Understanding Junos OS CLI Configuration Mode.
A command— quit —to exit the CLI. For information about this command, see the
.
Explorer
For more information about the CLI operational mode commands, see the
.

Commonly Used Operational Mode Commands

Table 6 on page 170 lists some operational commands you may find useful for monitoring
router or switch operation. For a complete description of operational commands, see
the Junos OS command references.
NOTE: The QFX3500 switch does not support the IS-IS, OSPF, BGP, MPLS,
and RSVP protocols.
Description
Versions of software running on the router or switch
telnet command opens telnet sessions to other hosts on
command copies files from one location on
copy
.
.
Copyright © 2016, Juniper Networks, Inc.
command opens Secure
ssh
.
CLI Explorer
hierarchy
restart
.
CLI Explorer
CLI
CLI Explorer
Command
show version
.