Neighbor (Protocols Vpls) - Juniper EX9200 Features Manual

neighbor (Protocols VPLS)

Syntax
Hierarchy Level
Release Information
Copyright © 2016, Juniper Networks, Inc.
neighbor neighbor-id {
mac-pinning;
associate-profile{
dynamic-profile-name;
profile-variable-set profile-variable-set-name;
}
backup-neighbor {...}
community community-name;
connection-protection;
encapsulation-type type;
ignore-encapsulation-mismatch;
oam {
bfd-liveness-detection
detection-time {
threshold milliseconds;
}
minimum-interval milliseconds;
minimum-receive-interval milliseconds;
multiplier number;
no-adaptation;
transmit-interval {
minimum-interval milliseconds;
threshold milliseconds;
}
version (1 | automatic);
}
ping-interval;
}
pseudowire-status-tlv;
psn-tunnel-endpoint address;
revert-time seconds;
static {
incoming-label label;
outgoing-label label;
}
switchover-delay milliseconds;
vpls-id-list vc-id-numbers;
}
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
vpls],
[edit logical-systems logical-system-name routing-instances instance-name protocols vpls
mesh-group mesh-group-name],
[edit routing-instances routing-instance-name protocols vpls],
[edit routing-instances instance-name protocols vpls mesh-group mesh-group-name]
Statement introduced in Junos OS Release 8.4.
The pseudowire-status-tlv
The option was added in Junos OS Release 14.2 for MX Series routers to provide
vpls-id-list
support for multiple pseudowires between the same pair of PEs in LDP-VPLS.
{
option was added in Junos OS Release 10.0.
Chapter 13: Configuration Statements
143