Mac-Table-Aging-Time - Juniper EX9200 Features Manual

VPLS Feature Guide for EX9200 Switches

mac-table-aging-time

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
138
mac-table-aging-time time;
[edit logical-systems logical-system-name routing-instances routing-instance-name protocols
vpls],
[edit routing-instances routing-instance-name protocols vpls]
[edit bridge-options],
[edit routing-instances routing-instance-name protocols evpn]
NOTE: For MX Series routers, the configuration statement is supported at
the
[bridge-options], [protocols vpls]
only.
Statement introduced in Junos OS Release 7.4.
Statement introduced in Junos OS Release 15.1 for MX Series routers.
Modify the timeout interval for the MAC table.
For MX Series routers, you can use the
[edit protocols l2-learning]
level or use the

mac-table-aging-time

or for a specific VPLS or EVPN instance. If multiple timeout interval values are configured
on a router, the router determines the timeout interval value in the following order of
priority:
Timeout interval configured at the VPLS or EVPN instance
Timeout interval configured for the bridge domain
Global timeout interval configured on the router
NOTE: For MX Series routers, the timeout interval configuration feature is
supported on routers with MPCs only.
time —Specify the number of seconds to wait between MAC table clearings.
Range: 10 through 1,000,000 seconds
Default: 300 seconds
routing—To view this statement in the configuration.
routing-control—To add this statement to the configuration.
Configuring the VPLS MAC Table Timeout Interval on page 32
Configuring the MAC Table Timeout Interval
, and
global-mac-table-aging-time
hierarchy level to configure the timeout interval at the global
to configure the timeout interval for a bridge domain
hierarchy levels
[protocols evpn]
statement at the
Copyright © 2016, Juniper Networks, Inc.