Mbss Screen - ZyXEL Communications WAP6405 User Manual

Figure 33 Networking > Wireless Network > WDS
The following table describes the labels in this screen.
Networking > Wireless Network > WDS
LABEL
WDS
(WDS0-WDS7)
Remote MAC
Address
Pre-Shared Key
Apply
Reset

11.9 MBSS Screen

A Multiple Basic Server Set (MBSS) allows you to use your WAP6405 to provide several Basic Server
Sets (BSS) simultaneously. You can then assign varying security types to different SSIDs. Wireless
clients can use different SSIDs to associate with the same access point.
Note: This screen is only available in the AP Mode
Click Networking > Wireless Network > MBSS tab. The screen appears as shown.
Chapter 11 Wireless Network
DESCRIPTION
This displays the number for each Remote MAC Address added.
Click on the check box to enable or disable the WDS link.
This is the MAC Address of the peer device your WAP6405 wants to make a
bridge connection with. Enter the MAC addresses in a valid MAC address format,
that is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
The peer WDS links should be working on the same channel.
You can connect to up to 8 peer devices.
Type the password that lets the peer WDS links establish a connection with your
WAP6405. The Pre-Shared Key field can be left empty or you can type a
password that should contain 64 ASCII Characters.
Click Apply to save your changes to the WAP6405.
Click Reset to reload the previous configuration from this screen.
WAP6405 User's Guide
(Section 3.1.2 on page
64
16).