5.1 Overview
The WAP6405 is set to access point mode by default. In this mode your WAP6405 bridges a wired
network (LAN) and wireless LAN (WLAN) in the same subnet. See the figure below for an example.
Figure 11 Wireless Internet Access in Access Point Mode
Note: See
Chapter 8 on page 34
Access Point mode.
5.2 What You Can Do
• Use the Status screen
WAP6405.
• Use the Network > Networking screen
WAP6405 acting as an access point.
• Use the Wireless Network screens
and wireless security between the wireless clients and the WAP6405.
C
Access Point Mode
for an example of setting up a wireless network in
(Section 5.5 on page
23) to view read-only information about your
(Chapter 10 on page
(Chapter 11 on page
WAP6405 User's Guide
22
H A PT ER
53) to set the IP address for your
56) to configure the wireless settings
5