ZyXEL Communications WAP6405 User Manual page 65

Figure 34 Networking > Wireless Network > MBSS
The following table describes the labels in this screen.
Table 20 Networking > Wireless Network > MBSS
LABEL
Network Name (SSID)
Broadcast SSID
Priority
Encryption
Pre-Shared Key
Apply
Cancel
Chapter 11 Wireless Network
DESCRIPTION
Type a name for one of your BSS. Click on the check box next to each
Network Name to enable the BSS.
You can enable up to 4 simultaneous BSS on your WAP6405.
Click on the check box if you want your SSID to be broadcasted to users
in the area.
Select a priority to configure the QoS for each BSS. The WAP6405 has
four priority levels, 0 has the highest priority and 3 has the lowest
priority.
Select the type of security to protect the information through the
wireless network.
Type the password users need to connect to this BSS.
Click Apply to save the changes made on your WAP6405.
Click Cancel to reload the previous configuration for this screen.
WAP6405 User's Guide
65