Connecting To A Wireless Network Using A Profile; Deploying The Wap6405 In Your Network - ZyXEL Communications WAP6405 User Manual

8.7.2 Connecting to a Wireless Network Using a Profile

Go to Configuration > Networking > AP Connection > Basic. Click Radio Enable to allow
1
your WAP6405 to connect to an AP through a wireless connection.
Enter the SSID and security settings of the wireless device to which you want to connect. Click
2
Apply.

8.7.3 Deploying the WAP6405 in your Network

After you finish configuring the operating mode and wireless settings on the WAP6405, disconnect
1
the computer from the WAP6405 and change its TCP/IP settings back to the previous ones.
Connect a device to the WAP6405, which you want to use to access the AP or wireless router
2
through the WAP6405. Make sure the device is set to obtain an IP address automatically.
Chapter 8 Tutorials
WAP6405 User's Guide
46