Ap Connection; Chapter 12 Ap Connection; Overview; What You Can Do - ZyXEL Communications WAP6405 User Manual

12.1 Overview

This chapter discusses how to establish a connection between your WAP6405 and another AP or
wireless network.
The following figure provides an example of two wireless networks connected together.
Figure 35 Example of Two Connected Wireless Networks
There are two wireless networks in this example. The AP in WLAN B is not connected directly to the
server, so it needs to connect to the AP in WLAN A. After WLAN B and WLAN A are connected, the
wireless clients can use the AP in WLAN B to interact with other devices (such as the printer) or
with the Internet. Two WAP6405s can be the APs in both WLANS. In WLAN A your WAP6405 works
in AP mode, whereas in WLAN B works in Universal Repeater mode.
Note: This chapter is only for Client mode and Universal Repeater mode.

12.2 What You Can Do

• Use the Basic screen
security between the WAP6405 and the wireless network.
C
HAPTER
(Section 12.3 on page 67) to enter the SSID and configure the wireless
WAP6405 User's Guide
66

AP Connection

1 2