Logical-Interface-Fpc-Redundancy; Interfaces) - Juniper EX9200 Features Manual

Related
Documentation
logical-interface-fpc-redundancy (Aggregated Ethernet Subscriber Interfaces)
Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Example: Configuring Aggregated Ethernet High-Speed Uplinks Between an EX4200
Virtual Chassis Access Switch and an EX4200 Virtual Chassis Distribution Switch
Example: Configuring Aggregated Ethernet High-Speed Uplinks with LACP Between an
EX4200 Virtual Chassis Access Switch and an EX4200 Virtual Chassis Distribution Switch
Configuring Aggregated Ethernet Links (CLI Procedure)
Configuring Aggregated Ethernet LACP (CLI Procedure)
Configuring LACP Link Protection of Aggregated Ethernet Interfaces (CLI Procedure)
Configuring Q-in-Q Tunneling (CLI Procedure)
Junos OS Ethernet Interfaces Configuration Guide

logical-interface-fpc-redundancy;

[edit interfaces aenumber aggregated-ether-options]
Statement introduced in Junos OS Release 11.2.
Statement introduced in Junos OS Release 13.2R2 for EX Series switches.
Provide module redundancy for demux subscribers on aggregated Ethernet bundles
configured with targeted distribution. Backup links for a subscriber are chosen on a
different EQ DPC or MPC from the primary link, based on the link with the fewest number
of subscribers among the links on different modules. If all links are on a single module
when this is configured, backup links are not provisioned.
By default, link redundancy is provided for the aggregated Ethernet bundle.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Link and Module Redundancy for Demux Subscribers in an Aggregated Ethernet
Interface
Configuring Module Redundancy for a Virtual Chassis on page 52
Chapter 11: Configuration Statements
93