Show Virtual-Chassis Device-Topology; Table 10: Show Virtual-Chassis Device-Topology Output Fields - Juniper EX9200 Features Manual

show virtual-chassis device-topology

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
Output Fields

Table 10: show virtual-chassis device-topology Output Fields

Field Name Field Description
Assigned member ID.
Member
Assigned device ID.
Device
For an EX8200 Virtual Chassis, the member ID and the device ID are always
identical.
Copyright © 2017, Juniper Networks, Inc.
show virtual-chassis device-topology
<all-members>
<local>
<member member-id>
Command introduced in Junos OS Release 10.4 for EX Series switches.
Command introduced in Junos OS Release 13.2X50-D15 for the QFX Series.
Command introduced in Junos OS Release 13.2X51-D20 for Virtual Chassis Fabric (VCF).
Display the device topology—the member and system IDs, the VCP numbers, and device
status—for all hardware devices in the Virtual Chassis or VCF.
—Display the device topology for all members of the Virtual Chassis or VCF.
none
—(Optional) Display the device topology for all members of the Virtual
all-members
Chassis or VCF.
local —(Optional) Display the device topology for the switch or external Routing Engine
on which this command is entered.
—(Optional) Display the device topology for the specified member
member member-id
of the Virtual Chassis or VCF.
clear
Understanding EX Series Virtual Chassis Port Link Aggregation
Understanding EX8200 Virtual Chassis Topologies
Table 10 on page 121 lists the output fields for the
command. Output fields are listed in the approximate order in which they appear.
Chapter 13: Operational Commands: Monitoring
show virtual-chassis device-topology
121