How To Manually Open Ports On A Router - D-Link DHA-130 User Manual

Ip/dect phone

Table of Contents

In the example that follows we begin by opening the DI-614+ Web configuration utility and going to Advanced > Virtual Server.

Follow the steps on the following pages to open the ports on your router for successful operation of the DHA-130.

How to Manually Open Ports on a Router

A total of 7 ports must be opened for the DHA-130 to work with

most routers or firewalls. T o open these ports, please do the

following:

A. Click Enabled

B. Give the Virtual Server a Name (such as i2eye)

C. Under Private IP, enter the IP address obtained from the

DHA-130

(How to obtain an IP address from the DHA-130: Turn the

DHA-130 on. Highlight

the

Main

Screen.

Settings>Network>Network Address >IP address)

D. Under Protocol Type, choose Both (TCP and UDP)

E. Under Private Port and Public Port, enter 3478

F. Under Schedule, click Always

G. Click Apply to save this entry

Y ou have now completed the entering of one port to be opened.

Y ou will need to open six more ports.

Repeat steps A through G five more times for each one of the

following five ports:

5060, 8080, and 9090.

Y ou have now completed the opening of the 4 ports. Y our

DHA-130 is ready to use with your router or gateway!

(Important: Not all routers and gateways are the same. Please

refer to your user product's manual for specific instructions on

opening ports).

the

Settings

button

Navigate

Table of Contents