Change Base Station - D-Link DHA-130 User Manual

9. When the DECT connection is established, the channel number used for communication between the base station and the handset appears under the
battery icon near the upper left corner of the display. Finally when "D-Life" appears in the center of the display, the phone is ready to use.

Change Base Station

The procedure to change which base station a handset will associate with is very similar to the procedure to add a new handset to a base station association group.
First press the Intercom button on the front of the base station for 5 seconds until the LEDs flash on and off in an alternating pattern.
1. To use another base station in an environment where more than one DHA-130 are being used, go to the BASE SETUP menu, choose SELECT BASE
and press OK.
Menu Names
D-Life
01/01 00:05
Menu Names
BASE SETUP
REGISTER
SELECT BASE
DELETE HANDSET
RESET
OK EXIT
1
64