Table of Contents
Advertisement
Internet. If you have been given a user name and password to use for your Internet connection and you are NOT using a router (broadband or DSL router)
configured to make the PPPoE connection, the Phone can be configured as a PPPoE client.
To configure the PhoneCorder as a PPPoE client, choose the PPPoE option from the My Internet Connection is: pull-down menu, type in the User Name and
Password used for authentication, and if desired or required, provide a Service Name and AC Name. The Idle Timeout is the time in minutes the PhoneCorder
is allowed to remain idle (i.e. no data received or transmitted) before the PPPoE session is ended. Use this option if your ISP charges for Internet access based on
the amount of time spent connected. If you have unlimited Internet use, leave this blank to keep the PPPoE connection on at all times.
Maintenance
Use the Maintenance menu page to change the password used to access the Phone's web utility and to upgrade the firmware.
72
Advertisement
Table of Contents
