Checking Your Installation
I/O Bit Tests
General Information
The ability to start the DriverLINX AIO Panel utility, which is available
after you install DriverLINX, verifies that DriverLINX and the board are
installed and configured satisfactorily.
You can also test the functions of the PIO-32 board, without needing to
write an application program, by connecting appropriate digital signals
and observing the responses with the DriverLINX AIO Panel.
After you configure and check your installation, you can attach
accessories as needed and wire the appropriate signals to the board. Refer
to Section 4 for instructions.
1. Start the AIO Panel as follows:
a. In the Start menu, click Programs.
b. Find the DriverLINX Test Panels folder, under which you
should find the AIO Panel entry.
3-11