Inventorying Required Installation Resources - Keithley PIO-32 User Manual

Inventorying Required Installation Resources

3-2
Install the DriverLINX software before installing the PIO-32
Note:
board. Otherwise, the device drivers will be more difficult to install.
Before installing DriverLINX and the board, do the following:
1. Inventory your PIO-32 board's configuration settings.
2. Determine the resources your PIO-32 board requires.
3. Inventory your computer's resources already allocated to other
installed devices.
4. Determine whether your computer has sufficient resources for your
PIO-32 board.
5. Determine whether your PIO-32 board can use your computer's free
resources.
The DriverLINX Installation and Configuration Guide, Section 1,
Note:
amplifies the inventory process in checklist items 1-5. (Ignore the rest of
the checklist items for now.) To display this manual from your
DriverLINX PIO Series CD-ROM, open the Windows Explorer, then
double click on X:\Drvlinx4\Docs\Instconf.pdf, where X = the letter of
the CD-ROM drive. Acrobat Reader must already be installed on the other
system. If necessary, you can first install Acrobat Reader directly from the
CD-ROM by double clicking X:\Acrobat\setup.exe.
Setup and Installation