Disassembly
Removing and Replacing the LCD Display Bracket
28
1.
Remove the battery cover, battery, SIM, and front housing cover as described
in the procedures.
2.
Using the flat end of the disassembly tool to gently release the 5 latches that
secure the LCD bracket to the transceiver pc board (See Figure 11).
3.
Carefully lift the LCD display bracket from the front housing. Be careful not
to bend or crease the bracket.
Latch
Latch
Figure 8. Removing the LCD Display Bracket
4.
To replace, align the LCD bracket to the transceiver board.
5.
Gently press the LCD bracket into place.
6.
Ensure all 5 latches snap securely into position.
7.
Replace the front housing cover, transceiver board, rear housing, SIM, battery,
and battery cover as described in the procedures.
June 12, 2003
Latch
Latch
E365
Latch
031371o
6809461A68