Level 1 and 2 Service Manual
Removing and Replacing the Display Assembly
6809493A69-O
1.
Remove the battery cover, battery, SIM, antenna, rear housing, transceiver
board assembly, flip assembly, and flip assembly bezel as described in the
procedures.
2.
Use the Torx driver and a T6 bit to remove the 2 flip screws from the flip
assembly (see Figure 12).
Figure 12. Removing the Flip Assembly Screws
3.
Insert the disassembly tool between the display module and the flip housing
and pry the display assembly up from the flip housing (see Figure 13).
Disassembly
Tool
Flip Housing
Figure 13. Removing the Flip Display Assembly
4.
Carefully lift the flip display assembly out of the flip housing.
Flip Screw
Flip Screw
Display Assembly
May 18, 2005
Disassembly
050348o
050349o
31