Whirlpool 4KWED4750 Use And Care Manual page 5

CONTROL PANEL & FEATURES
PUSH TO START
TmMED
DRY
0 10 FLUFF AIR
_PUSH TO START
Heavy
Dry O
Not all features and options are available on all models.
Appearance may vary.
O
END OF CYCLE SIGNAL/PUSH TO START
The End of Cycle Signal produces an audible sound when
the drying cycle is finished. Promptly removing clothes at the
end of the cycle reduces wrinkling.
Turn the END OF CYCLE SIGNAL knob to select the
desired setting (On or Off). Press the PUSH to START
knob to start the dryer.
NOTE: When the Wrinkle Shield setting is selected
and the End of Cycle Signal is on, the tone will sound
every 5 minutes until the clothes are removed, or the Wrinkle
Shield setting ends.
O WRINKLE SHIELD FEATURE (on some models)
When you are unable to remove a load of clothes from the
dryer as soon as it stops, wrinkles can form. The WRINKLE
SHIELD feature periodically tumbles, rearranges, and fluffs
the load to help keep wrinkles from forming.
[] Get up to 40 minutes of heat-free, periodic tumbling at
the end of a cycle. Turn the WRINKLE SHIELD knob to
ON or OFF at any time before the cycle has ended.
TEMPERATURE / FABRIC (on some models)
Select a drying temperature based on the fabrics in your
load. If you are unsure of the temperature to select for a
load, select the lower setting rather than the higher setting.
@
DRYER CYCLE KNOB
Use your Dryer Cycle knob to select available cycles on
your dryer. Turn the knob to select a cycle for your laundry
load. See "Cycle Guide" for detailed descriptions of cycles.
TIMED DRY
Will run the dryer for the specified time on the control.
On models with a selectable temperature knob, you may
choose a setting based on the fabrics in your load. Drying
time and temperature will depend on your dryer model.
FLUFF AIR
Will run the dryer in a no heat cycle for the specified time
on the control. On models with a selectable temperature
knob, you may choose a setting based on the fabrics in
your load. Drying time will depend on your dryer model.
AUTOMATIC DRY
Senses moisture in the load or air temperature and shuts
off when the load reaches the selected dryness level.
Gives the best drying in the shortest time. Drying time will
vary based on fabric type, load size, and dryness setting.