Group Listening - Yealink EXP50 Quick Start Manual

1. Click on Dsskey->Ext Key.
2. In the desired DSS key field, select SpeedDial from the pull-down list of Type.
3. Enter the desired number you want to dial out directly in the Value field.
4. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
5. Select the desired line from the pull-down list of Line.
6. Click Confirm to accept the change.
Intercom
You can connect to the operator or the secretary more quickly by pressing the intercom
key in an office environment .
1. Click on Dsskey->Ext Key.
2. In the desired DSS key field, select Intercom from the pull-down list of Type.
3. Enter the remote extension number in the Value field.
4. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
5. Select the desired line from the pull-down list of Line.
6. Click Confirm to accept the change.
Line
You can configure a DSS key as the line key. It performs the same as a hard line key.
1. Click on Dsskey->Ext Key.
2. In the desired DSS key field, select Line from the pull-down list of Type.
3. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
4. Select the desired line from the pull-down list of Line.
5. Click Confirm to accept the change.
BLF
The BLF key allows you to monitor the status of the pre-defined number. You can also
pick up incoming calls of the monitored number.
1. Click on Dsskey->Ext Key.
2. In the desired DSS key field, select BLF from the pull-down list of Type.
3. Enter the phone number or extension you want to monitor in the Value field.
4. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
5. Select the desired line from the pull-down list of Line.
6. Enter the directed call pickup code in the Extension field.
7. Click Confirm to accept the change.

Group Listening

You can configure a DSS key as the group listening key. Then you are allowed to activate
the Speakerphone and Handset/Headset at the same time by pressing the group listening
key.
1. Click on Dsskey->Ext Key.
2. In the desired DSS key field, select Group Listening from the pull-down list of Type.
3. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
4. Click Confirm to accept the change.
6