Yealink EXP50 Quick Start Manual page 5

Forward
When there is an incoming call, you can press the forward key to forward the incoming
call to the pre-defined destination number.
1. Click on Dsskey->Ext Key.
2. In the desired DSS key field, select Forward from the pull-down list of Type.
3. Enter the destination number to forward the incoming calls to in the Value field.
4. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
5. Click Confirm to accept the change.
Transfer
You can press the transfer key to perform a Blind/Semi-Attended/Attended transfer during
a call.
1. Click on Dsskey->Ext Key.
2. In the desired DSS key field, select Transfer from the pull-down list of Type.
3. Enter the phone number you want to transfer the call to in the Value field.
4. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
5. Click Confirm to accept the change.
Hold
You can press the hold key to hold and retrieve a call.
1. Click on Dsskey->Ext Key.
2. In the desired DSS key field, select Hold from the pull-down list of Type.
3. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
4. Click Confirm to accept the change.
DND
You can press the DND key when the phone is idle to activate or deactivate the DND mode.
1. Click on Dsskey->Ext Key.
2. In the desired DSS key field, select DND from the pull-down list of Type.
3. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
4. Click Confirm to accept the change.
ReCall
You can place a call back to the caller of the last incoming call by pressing the ReCall key.
1. Click on Dsskey->Ext Key.
2. In the desired DSS key field, select ReCall from the pull-down list of Type.
3. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
4. Click Confirm to accept the change.
SMS
You can access the SMS more quickly and easily by pressing the SMS key.
1. Click on Dsskey->Ext Key.
2. In the desired DSS key field, select SMS from the pull-down list of Type.
3. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
4. Click Confirm to accept the change.
4