Disassembly and Reassembly
3-9 Fuser Ass'y
1. Before you remove the Fuser Ass'y, you should
be power off and remove:
- Side Cover Ass'y (see page 3-8)
2. Remove the one screw and take out the Cover
Sheet Connector.
3. Unplug the one connector.
4. Remove the three screws and take out the Fuser
Ass'y.
3-10
6. Remove the two screws and take out the Halo-
gen Lamp.
Halogen Lamp
5. Remove the four screws and take out the Ther-
mostat.
Thermostat
7. After remove the two screw and open the Lower
Ass'y froward tack out the Heat Roller Ass'y
from Upper Fuser Ass'y.
Heat Roller
Samsung Electronics