Hysteresis - Bosch DDU S2 Plus Manual

10 | Analog and Frequency Inputs
Notice
10.5
94 / 136
Physical limits
of channel
4. Click 'Finish' when done.
5. Enter channel name and description.
6. Click 'OK' when done.
The channel is inserted into the DDU 8 Project Tree.
Working with automatically created measurement sheets is ex‐
plained in chapter 'Setting up an online measurement'.

Hysteresis

The hysteresis function avoids the high‐frequent switchover of the measurement
channel value. The hysteresis can be adjusted for each input measurement chan‐
nel individually and can be used for further processing.
1. Click 'Measurement Sources' in the Toolbox.
2. Drag the 'Hysteresis' computed source from the Toolbox and drop it on
'Computed Channels' in the DDU 8 Project Tree.
A 'Hysteresis Wizard' opens.
DDU S2 PLUS Manual
Enter physical limits
of the channel
Choose data type of
the measurement
variable
Check the box to
force the channel's
quantization if the
quantization should
be a fixed value in
the whole CAN
system.
Enter name to auto-
matically create a
new measurement
sheet.
Bosch Motorsport