Configuring Inputs - Bosch DDU S2 Plus Manual

10 | Analog and Frequency Inputs
10.3
10.3.1
80 / 136
▪ Linear phase – no signal distortion
▪ Latency compensation – no filter delay in recorded data

Configuring inputs

Configuring a predefined Bosch sensor with the
'Bosch Sensor Wizard'
1. Click on 'Measurement Sources' in the Toolbox.
2. Expand the list of 'I/O Channels' by clicking on '+' in the DDU 8 Project Tree.
3. Drag the 'Bosch Sensor Wizard' from the Toolbox and drop it on the desired
analog input channel in the DDU 8 Project Tree.
The 'Bosch Sensor Wizard' opens.
DDU S2 PLUS Manual
Drag + Drop
Bosch Motorsport