Bosch DDU S2 Plus Manual page 64

8 | Display Configuration
64 / 136
1st: Double-click
on 'Conditional
Channels' in
Project Tree
2nd: Click on
'Add condition'
The ‚Create/edit condition' window appears. Define the condition channel using
the following configuration possibilities:
a)
b)
c)
d)
e)
a) Enter the name of the conditional channel.
b) Select the comparing mode:
- Constant: Compare a measurement channel with a constant value.
- Channel: Compare a measurement channel with a measurement channel.
- Range: Compare a measurement channel with a defined value range.
- Multiple: Compare a measurement channel with up to 5 constant values.
c) Depending on the chosen comparing mode, you can enter the following values:
- Constant: Choose the measurement channel or condition, the operator and enter the value of the channel.
- Channel: Choose the measurement channel or condition, the operator and the measurement channel or
condition to be compared.
- Range: Choose the measurement channel or condition, the operator and define the minium and
maximum value.
- Multiple: Choose the measurement channel or condition, the operator and enter the value of up to 5 constants.
d) Enter the minimal time to detect the signal of the measurement channel to avoid high-frequent switchovers.
e) Enter the time the signal of the measurement channel is delayed after its ending.
f) Choose the output setting of the result.
- Constant TRUE/FALSE: Result is as a constant with the value TRUE or FALSE.
- Blinking: Result is a blinking if the condition is fulfilled.
- Pulse: Result is a short one-time pulse if the condition is fulfilled.
- Toggling output: Result is a pulse that lasts until the next condition is fulfilled.
Click 'Ok' when done. The conditional channel is displayed in the condition chan‐
nel window.
DDU S2 PLUS Manual
f)
Bosch Motorsport