Safety Guidelines; Safe Handling; Power Supply - Seagate SRPS20 User Manual

Wss nas 2-bay 4-bay 6-bay

Hide thumbs Also See for SRPS20:

User manual (68 pages)

Administration manual (42 pages)

Manual (70 pages)

Table Of Contents

Table of Contents

Important info: Refer to

The Seagate WSS NAS 2-Bay | 4-Bay | 6-Bay must run with all of its parts and units in place. In order to comply

with applicable safety, emission, and thermal requirements, the cover should not be removed and all drives

With the sole exception of "hot-swapping" compatible hard drives from protected volumes (see

Maintenance), you must shut down and disconnect power from the NAS before maintenance or physical

troubleshooting is performed on the device. Only qualified technical service personnel should be allowed to

The Seagate WSS NAS must only be operated from a power supply input voltage range of 100 - 240 VAC, 50 to

.Make sure that the socket outlets are located near the equipment and are easily accessible

The power supply on this unit is not serviceable or field replaceable. If Seagate technical support determines

that the power supply is faulty or has failed and the unit is under warranty, return the NAS to Seagate per the

The battery in the Seagate WSS NAS is not field-replaceable. If Seagate technical support determines that the

battery is faulty or has failed and the unit is under warranty, return the NAS to Seagate per the instructions

Warranty

before performing any hardware repairs or maintenance that is

( . and/or empty drive trays must be installed according to the instructions (see

.Permanently unplug the unit if you think that it has become damaged in any way

:provided by the Seagate technician. If you attempt to remove or replace the battery

.There is a strong risk of explosion when using an incorrect type

4/13/15