Step 1 - Cables
Connec ons
.Connect the Ethernet cable to the NAS and the router .1
.Connect the power cable to the NAS and the outlet .2
:You can also connect
.A second Ethernet cable for redundancy or performance
Cable management: Careful management of cables is recommended for optimal operation. It
.prevents potential hazards and allows for easier maintenance
Step 2 - Insert hard drives
:Consider the following before inserting hard drives into the enclosure
.Seagate recommends installing the hard drives into the diskless enclosure from left to right
40
4/13/15
Seagate WSS NAS 2-Bay | 4-Bay | 6-Bay