Access The Lcd Display Menu - Seagate SRPS20 User Manual

Wss nas 2-bay 4-bay 6-bay

Hide thumbs Also See for SRPS20:

User manual (68 pages)

Administration manual (42 pages)

Manual (70 pages)

Table Of Contents

Table of Contents

The Seagate WSS NAS 4-Bay and 6-Bay include an LCD menu. You can check general hardware and operating

system settings while the WSS NAS is powered on. Review the table below for further details on the LCD

Sub-menu

.See the IP addresses assigned to the WSS NAS

.See the percent of storage used: globally and per volume

Up to five alerts are listed on the sub-menu. Alerts include: temperature; casing; fan; and

.storage

.Check the temperatures for the WSS NAS's: hard drives; CPU; and motherboard

.Review the fan's rotational speed

Review the date, time and uptime. Uptime refers to the amount of time that the WSS NAS has

.been powered on

Check the version of the Seagate Monitor tab in the Windows Storage Server 2012 R2

.Essentials dashboard

.Push the WSS NAS's up or down arrow to search the menu selections. Each screen reveals two selections .3

.Use the WSS NAS's up or down arrow to highlight your selection. A horizontal arrow points to the selection .4

.Apply a long push on the WSS NAS's up or down arrow to enter the sub-menu for that selection .5

.If applicable, push the WSS NAS's up or down arrow to search through the sub-menu selections .6

Each menu and sub-menu remains on the LCD display for 30 seconds. To exit a sub-menu, apply a long push to

(LCD Menu (4-Bay and 6-Bay

.See

System Overview

.Apply a short push on the WSS NAS's up or down arrow to turn the LCD on .1

.Apply a long push on the WSS NAS's up or down arrow to enter the main menu .2

4/13/15

for the locations of the LCD menu and the up/down arrows