Advertisement
Funai ZV427FX4 DVD Recorder/VCR with Line-In Recording
4(A): Recording from VHS to DVD
you should see the indicator light on the front of the Funai Unit switch from VCR mode to
DVD mode, shown below.
NOTE: If you don't see the video mode switch to DVD (above), press [DVD] until you do.
NOTE: The screen will remain blank after pressing [DVD]. This is normal.
Now, press [REC MODE] repeatedly until
the desired recording mode is set.
A chart explaining the specifics of the re-
cording modes is at the right. If you are
unsure which recording mode to use,
press [REC MODE] until [SP] is selected.
To begin copying your VHS tape to DVD, first you
must select the correct dubbing mode from the
list. Select [VCR -> DVD].
Then press [SETUP] to exit.
Now press [DVD] on the remote. At this point,
Advertisement
