Ikco RUNNA LX Owner's Manual page 74

Coolant level of cooling system *
Use the fluid recommended
manufacturer. When the engine is warm,
the temperature of the coolant is controlled
by the engine fan. As this fan can operate
with the ignition key removed and because
the cooling system is pressurized, wait at
least one hour after the engine has stopped
before carrying out any work.
Note: Applicable antifreeze used in the
vehicle must be Ethylene Glycol.
Warning
Slacken the cap by two turns to
release the pressure to prevent any
risk of scalding. When the pressure
has dropped, remove the cap and
top it up.
Note: the coolant does not need to be
changed.
Warning
Avoid opening the coolant cap
after one hour the engine has been
stopped.
Used products
by the Do not dispose used oil, brake fluid or
coolant into drains or onto the ground.
Hydraulic steering fluid reservoir
Open the reservoir, with the engine at
ambient temperature. The level should
always be above the minimum mark and
close to the maximum mark.
Warning
Hydraulic steering
poisonous and should be kept in
the closed container out of reach of
children. If swallowed refer to the
physician immediately.
Cuation
Hydraulic oil destroys the painted
surfaces. First clean the oil by a cloth
and then wash if with the water and
special shampoo.
Windscreen wash level *
For best quality cleaning and safety of
yourself, use the products recommended
by the manufacturer.
Note: Applicable washing solution of
glasses must be Iseo Propanol.
oil is very
Cuation
Do not use the mixture of the water and
antifreeze in the washing reservoir.
This damages the vehicle paint.
* It's recommended to use the approved brands
and packages, offered by the Isaco.
ENGINE COMPARTMENT
73
4