Seats - Ikco RUNNA LX Owner's Manual

SEATS

Front seats
1- Forwards-backwards adjustment
(Adjusting forwards-backwards of the seat)
Pull up the adjusting lever and push the
2
seat forward and backward (slide it)
2- Head restraint height adjustment
To raise the head restraint, pull it upwards.
The adjustment is correct when the top of
the head restraint is aligned with the top
of the head of the occupant of the seat.
Head restraint is fitted with metal frame
with notches, which prevent the head
restraint dropping down (this is a safety
device in case of impact).
To lower the head
simultaneously the button on the left hand
guide at the base of the head restraint frame
and head restraint downwards. To remove
the head restraint, push the lug. Head
restraint angle is adjustable.
3-Driver's seat height adjustment
Pull the adjusting handle upwards. Remove
your weight from the seat to raise it, or
press on the seat to lower.
4- Seat back angle adjustment
Push the adjusting handle back.
32
Warning
- take care that front passengers
should never travel with the back
seat tilted down. Complete safety
capability of the seat belt is only
when the seat back angle in relation
to the vertical line to be 25 degrees.
- The seat belt should be positioned
on the shoulder; otherwise it will not
have optimum performance. Ensure
the seat backs are in correct and
proper position.
restraint, push
Warning
- Never drive with the head restraint
removed. They should be in place
and correctly adjusted.
- Never adjust the seat when driving.
- take care the foot of the rear
passenger not to be under the seat
when lowering the seat.