Table of Contents
Advertisement
Connections
Optional: Connecting to an
Audio System
STEREO
Pb
Y
PCM /
COMPONENT
DTS / MPEG
COAXIAL
EO
S-VIDEO
AV
VIDEO OUT
DIGITAL OUT
Stereo has Dolby Pro Logic or Right
/ Left Audio In jacks
1
Select one of the video connections to
your TV (CVBS VIDEO IN, S-VIDEO IN,
or COMPONENT VIDEO IN) depending
on the options available on your TV.
2
Set the PROGRESSIVE/INTERLACE
switch to INTERLACE for CVBS or S-
VIDEO connections.
3
Set the PROGRESSIVE/INTERLACE
switch to PROGRESSIVE for
COMPONENT VIDEO IN connection
with a Progressive Scan TV.
4
Use the audio cables (white/red) to
connect AUDIO OUT (L/R) jacks of
the DVD Player to the corresponding
AUDIO IN jacks on the stereo system
(cable not supplied).
Helpful Hint:
–
For optimum stereo sound quality, always
connect Left and Right channel from the
multi-channel output and set [Analog
Output] setting to 'STEREO', see page 32).
14
01-41 DVP900_00A31
OPTICAL
AUDIO
IN
DIGITAL
CENTER
HDMI
DIGITAL/
L
L
L
R
R
R
MAIN
SUB WOOFER
SURROUND
OPTICAL
MIXED 2CH
6CH DISCRETE
AUDIO OUT
1
2
3
14
Optional: Connecting to a Digital
Receiver
Receiver
SCAN MODE
Pr
Pb
Y
INTERLACE
COMPONENT
PROGRESSIVE
VIDEO
S-VIDEO
AV
VIDEO OUT
Receiver has a PCM, Dolby Digital,
or MPEG2 decoder
Select one of the video connections to
your TV (CVBS VIDEO IN, S-VIDEO IN,
or COMPONENT VIDEO IN) depending
on the options available on your TV.
Connect either the COAXIAL or
OPTICAL jack of the DVD Player to the
corresponding Digital Audio In jack on
your Receiver (cable not supplied).
Set the DVD Player's Digital Output to
PCM-ONLY or ALL depending on the
capabilities of your Receiver (see page 34
{DIGITAL OUTPUT}).
Helpful Hints:
–
If the audio format of the digital output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
/00_3139 246 13873
13/01/2005, 09:58
OPTICAL
AUDIO
IN
COAXIAL
OR
PCM /
DIGITAL/
L
L
DTS / MPEG
R
R
COAXIAL
OPTICAL
MIXED 2CH
DIGITAL OUT
AU
Advertisement
Table of Contents
