Connections
Optional: Connecting to an
Audio System
Stereo system has Dolby Pro Logic
or Right / Left Audio In jack
Receiver has a PCM, Dolby Digital,
or MPEG2 decoder
Select one of the video connections
(CVBSVIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on yourTV
© Use the audio cables (white/red) to
connect AUDIO OUT (L/R) jacks of
the DVD Player to the corresponding
AUDIO IN jacks on the stereo system
(cable supplied).
Optional: Connecting Digital AV
Receiver
Select one of the video connections
(CVBSVIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on yourTV.
© Connect the COAXIAL jack of the DVD
Player to the corresponding Digital Audio
In jack on your Receiver (cable not
supplied).
© Set the DVD Player's Digital Output to
PCM-ONLY or ALL depending on the
capabilities of your Receiver (see page 37
"Digital Output").
Helpful Hints:
— .If
the audio format
of
the Digital Output
does not match the capabilities
of
your
receiver, the receiver will produce a strong
distorted sound or no sound at all.
14