Table of Contents
Advertisement
Connections
Optional: Connecting to an
Audio System
STEREO
Stereo has Dolby Pro Logic or Right
/ Left Audio In jacks
1
Select one of the video connections to
your TV (CVBS VIDEO IN, S-VIDEO IN,
or COMPONENT VIDEO IN) depending
on the options available on your TV.
2
Use the audio cables (white/red) to
connect AUDIO OUT (L/R) jacks of
the DVD Player to the corresponding
AUDIO IN jacks on the stereo (cable
supplied).
OPTICAL
AUDIO
IN
DIGITAL
VIDEO
Pb
Pr
OUT
L
R
Y
COAXIAL OPTICAL
S-VIDEO
AUDIO OUT
OUT
DIGITAL OUT
Optional: Connecting to a Digital
Receiver
Receiver
Receiver has a PCM, Dolby Digital,
or MPEG2 decoder
1
Select one of the video connections to
your TV (CVBS VIDEO IN, S-VIDEO IN,
or COMPONENT VIDEO IN) depending
on the options available on your TV.
2
Connect either the COAXIAL or
OPTICAL jack of the DVD Player to the
corresponding Digital Audio In jack on
your Receiver (cable not supplied).
3
Set the DVD Player's Digital Output to
PCM-ONLY or ALL depending on the
capabilities of your Receiver (see page 27
"Digital Output").
Helpful Hint:
–
If the audio format of Digital Output
does not match the capabilities of your
receiver, the receiver will produce a strong,
distorted sound or no sound at all.
OPTICAL
AUDIO
OUT
DIGITAL
OR
Pb
Pr
VIDEO
OUT
L
R
Y
COAXIAL OPTICAL
S-VIDEO
AUDIO OUT
DIGITAL OUT
OUT
Advertisement
Table of Contents
