Table of Contents
Advertisement
Problem
Disc can't play
No return to start-up screen when
disc is removed
The player does not respond to
the Remote Control
Buttons do not work
Player does not respond to some
operating commands during playback.
DVD Player cannot read
CDs/DVDs
Menu items cannot be selected
Visit us at www.philips.com/support for service support
01-41 DVP900_00A31
Solution
– A DVD+R/DVD+RW/CD-R must be finalized.
– Ensure the disc label is facing up.
– Check if the disc is defective by trying another disc.
– If you have recorded a Picture CD or MP3 CD
yourself, ensure that your disc contains at least 10
pictures or 5 MP3 tracks.
– Check the Disc's Region Code.
– Reset the unit by switching the player off, then on
again.
– Aim the Remote Control directly at the sensor
on the front of the player.
– Reduce the distance to the player.
– Replace the batteries in the Remote Control.
– Re-insert the batteries with their polarities (+/–
signs) as indicated.
– To completely reset the player, unplug the AC
cord from the AC outlet for 5-10 seconds.
– Operations may not be permitted by the disc.
Refer to the instructions of the disc jacket.
– Use a commonly available cleaning CD/DVD to
clean the lens before sending the DVD Player for
repair.
– Press STOP twice before selecting the System Menu.
– Depending on the disc availability, some menu items
cannot be selected.
39
Troubleshooting
/00_3139 246 13873
13/01/2005, 09:58
39
Advertisement
Table of Contents
