Optional: Connecting To A Multi-Channel Receiver; Receiver Has Multi-Channel Audio Input Jack - Philips DVP9000S User Manual

Optional: Connecting to a HDMI/
DVI Device - cont'd
Using HDMI (High Definition
Multimedia Interface) sockets
The HDMI is backward compatible with
many DVI devices using an appropriate
adaptor plug.
If a DVI device is connected, an
additional audio cable will be needed for
audio transmission.
Audio transmission is possible when
{HDMI Audio} is switch to on.
This DVD Player will support HDCP
compliance only.
Helpful hint:
– Set the SCAN MODE switch to
PROGRESSIVE.
01-41 DVP900_00A31
Optional: Connecting to a Multi-
channel Receiver
AV Receiver
Y
NT
VIDEO
Receiver has multi-channel audio
input jack
1
Select one of the video connections
(CVBS VIDEO IN, S-VIDEO IN, SCART or
COMPONENT VIDEO IN) depending on
the options available on your TV.
2
Set the PROGRESSIVE/INTERLACE
switch to INTERLACE for CVBS or S-
VIDEO connections.
3
Set the PROGRESSIVE/INTERLACE
switch to PROGRESSIVE for
COMPONENT VIDEO IN connection
with a Progressive Scan TV.
4
Use the audio cables (white/red) to
connect AUDIO OUT (Front L&R,
Center, Surr L&R, Sub Woofer) jacks of
the DVD Player to the corresponding
AUDIO IN jacks on the receiver
(cable not supplied).
13
Connections
MULTICHANNEL AUDIO IN
FRONT CENTER REAR
R
L
FRONT SUBW. REAR
CENTER
PCM / DIGITAL/
L L
DTS / MPEG
R R
MAIN SUB WOOFER
COAXIAL OPTICAL MIXED 2CH
6CH DISCRETE
AV
DIGITAL OUT AUDIO OUT
/00_3139 246 13873
13/01/2005, 09:57
R
L
L
~ A
MA
R
SURROUND
13