Optional: Connecting To A Multi-Channel Receiver; Receiver Has A Dolby Digital Decoder; Optional: Connecting To A Stereo System; Stereo System Has Dolby Pro Logic Or Right / Left Audio In Jack - Philips DVP5965K/94 User Manual

Optional: Connecting to a Multi-
channel Receiver
AV Receiver
Receiver has a Dolby Digital
decoder
1
Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your TV.
2
Connect the Audio Out Left and Right
jack for Front and Rear speakers to the
corresponding input sockets on your
Receiver (cable supplied).
3
Connect the Audio Out for Center
speaker and Subwoofer to the
corresponding inputs on your Receiver
(cable not supplied).
4
Set the DVD Player's Analog Output to
'Multichannel' to enable playback of DVDs
recorded in Multi-channel. (see page 35
"Setting the analogue output").
Helpful Hint:
– If the subwoofer is equipped with its own
amplifier, the Subwoofer connection should
be connected directly to the subwoofer.
01-49_DVP5965K_94_eng_RC2
MULTICHANNEL AUDIO IN
FRONT REAR CENTER
R R
L L
FRONT REAR SUBW.
1
2
11
Connections
Optional: Connecting to a Stereo
System
STEREO
Stereo system has Dolby Pro Logic
or Right / Left Audio In jack
Select one of the video connections
(CVBS VIDEO IN or COMPONENT
VIDEO IN) depending on the options
available on your TV.
Use the audio cables (white/red) to
connect AUDIO OUT (L/R) jacks of
the DVD Player to the corresponding
AUDIO IN jacks on the stereo system
(cable supplied).
06/07/06, 2:13 PM
AUDIO
IN
DIGITAL
11