Table of Contents
Advertisement
Connections
Connecting the power cord
COMPONENT
VIDEO IN
S-VIDEO
IN
V (Pr/Cr)
AUDIO
OUT
~ AC MAINS
U (Pb/Cb)
VIDEO IN
Y
DIGITAL AUDIO OUT
PCM/MPEG2/Dolby Digital
COAXIAL OPTICAL
After everything is connected
properly, plug in the AC power cord
to the power outlet.
Never make or change any connections
with the power switched on.
When no disc is loaded, press
STANDBY ON on the DVD Player
front panel,
"NO DISC" may appear on the
display panel.
NO DISC
OPEN/CLOSE
8
01-38 DVP720_752
Optional: Connecting to a Multi-
channel Receiver
AV Receiver
CVBS
Y
Y
Pr
Pb
Pr
Pb
S-VIDEO
Receiver has a Dolby Digital or DTS
decoder
1
Select one of the video connections
(CVBS VIDEO IN, S-VIDEO IN, SCART,
COMPONENT VIDEO IN) depending on
the options available on your TV.
2
Connect the Audio Out Left and Right
jack for Front and Rear speakers to the
corresponding input sockets on your
Receiver (cable supplied).
3
Connect the Audio Out for Center
speaker and Subwoofer to the
corresponding inputs on your Receiver
STOP
PLAY/PAUSE
(cable not supplied).
4
Set the DVD Player's Analog Output to
'Multichannel' to enable playback of DVDs
recorded in Multi-channel. (see page 25
"Setting the analogue output").
Helpful Hint:
–
amplifier, the Subwoofer connection should
be connected directly to the subwoofer.
8
MULTICHANNEL AUDIO IN
FRONT
CENTER
REAR
R
L
FRONT
SUBW.
REAR
CENTRE
L
L
R
R
SUB-
STEREO
FRONT
WOOFER
If the subwoofer is equipped with its own
3139 246 13512
3/08/2004, 4:51 PM
R
L
L
R
REAR
Advertisement
Table of Contents
