Maintenance; Cleaning The Device; Repairs; Replacing The Battery - Jabbla Tellus 5 User Manual

Tellus 5
1

Maintenance

1.1

Cleaning the device

Clean the device regularly so bacteria don't get the opportunity to spread.
It is best to remove dust with a dry, soft cloth. For minor stains on the casing,
use a damp cloth. Make sure no moisture can enter through the speaker ope-
nings, the microphone opening or the connectors. Any dirt near the connec-
tors can be removed with a cotton bud.
To clean the touch screen, use a dry cloth; do not use kitchen paper as this may
cause tiny scratches. To remove grease or stains from the screen, it is recom-
mended that you use cleaning agents specifically designed for cleaning
screens (aerosol or wipes). Do not press too hard on the screen when cleaning.
It is best to clean the carry case with a dry or slightly damp cloth. The carry case
can also be cleaned with a soft brush.
1.2

Repairs

In the event of damage to the device please contact the distributor of the
device, or contact Jabbla's support department.
Do not attempt to carry out any repairs yourself. This could damage the device
and invalidate your warranty.
1.3

Replacing the battery

1 Shut down the Tellus. See "Shutting down the Tellus" on page 24
2 As required, remove the Tellus from its mounting.
3 Use a cloth to place the Tellus on, with the screen facing down on the
cloth.
F Maintenance and troubleshooting
36
1 Maintenance
4 Fold open the tray stand (15).
5 Loosen the 4 screws (24) and remove the cover (25).
6 Remove the battery (26) from the device.