INDEX Outline ________________________________________________________________________________ 3 Specifications ___________________________________________________________________________ 3 Before weighing _________________________________________________________________________ 4 Main body ___________________________________________________________________________ 4 Name and function of the components ___________________________________________________ 4 Choosing the installation site ___________________________________________________________ 4 Precautions on use _______________________________________________________________________ 5 Operation keys __________________________________________________________________________ 5 Unpacking and delivery inspection _______________________________________________________ 6 Turning the power on _________________________________________________________________ 6 Warming up _________________________________________________________________________ 6 Using the balance ____________________________________________________________________ 6...
ENGLISH OUTLINE Thank you for purchasing YP series electronic balance. The YP models are high performance electronic balances that we confidently recommend based on 20 years of precision balance manufacture. While there models are of course capable of fast and accurate weighing, the YP models all work on high precision strain gauge load cell which implements high speed stabilization and high reliability.
BEFORE WEIGHING Main body Level screws Adjust to level the balance Place the object to be eighed here Display panel Operation keys Shows the weighing results, information Used to open and close the for making function settings, the balance, tare the balance, perform currentfunction setting calibration and print.
PRECAUTIONS ON USE OPERATION KEYS During Weighing Press once and Release Press and hold for a while Turn on or turn off the balance — Select the counting function — Tare the balance(setting it to zero) Performs calibration Select the unit —...
Unpacking and delivery inspection Check that all of the items indicated below are included in the package, and that nothing has been damaged. 1. Main Body. 2. Pan. 3. Introduction Manual. 4. Adapter. Turning the power on 1. Insert the plug of the Power Cord into the DC IN connector on the back of the balance. 2.
PERFORMING SPAN CALIBRATION Always perform span calibration for a balance after moving it. Weights are required for external calibration balances. Before performing span calibration, warm up the balance in advance. Also, carry out the adjustment at a location where there are few people moving around and there is no air flow or vibration.
Need help?
Do you have a question about the EH 500 and is the answer not in the manual?
Questions and answers