Sony HAW-EIBU Installation Manual page 15

3
Remove the dummy HDD from the tray, set the actual
HDD into the tray in the direction illustrated, and
secure it using the four HDD screws (+K, UNC × 5).
4
Fully insert the tray in which the HDD is installed
into the slot, and lock it into place.
5
Reinsert the HDD lock removed in step 1.
6
Attach the front panel.
Insert the four tabs on the front panel into the
corresponding holes on the unit, and slide the panel to
the left.
7
Use the supplied front panel key to lock the front
panel.
Turn the front panel key 90 degrees clockwise.
15