Configuring Initial Settings with Setup Table of Contents Wizard ............21 Configuring the Recording Disk Usage Precautions ........4 Settings ............22 Package Contents ........6 Updating the Device Pack Version .... 25 System Requirements ......7 Starting Management Client ...... 26 Names and Functions of Parts....8 Authorizing the Recording Server .....
Page 3
• Sony assumes no responsibility for damages, loss of income, or any claims from a third party arising out of use of the server or supplied software.
Do not stack units on top of each other or place the unit on other SONY WILL NOT BE LIABLE FOR DAMAGES OF objects that may generate heat. ANY KIND RESULTING FROM A FAILURE TO...
Page 5
• When placing the unit on a floor or other surface, make Do not browse any other website in the Web browser sure that the unit is equipped with the specified rubber while making settings or after making settings. Since the feet, and put the unit down carefully.
If the power supply is interrupted while the unit is in package: operation, data may be damaged. Be sure to take • HAW-EIBU (1) measures against power outages to protect data. • Front panel (1) • Before Using this Unit (leaflet) (1) •...
A resolution of at least 1024 × 768 and 16-bit color are the minimum suggested specifications. 3) Contact your dealer for details about compatible Sony network cameras. 4) Use a USB keyboard with a cable. However, keys other than the standard may not function.
When a system error turns off the unit. or other problem occurs, it lights or blinks red. If this LED lights or blinks red, contact your Sony dealer. Caution Pressing and holding down the power switch...
USB flash memory to the unit. Lights amber if the RAID is degraded or rebuilding. i HDDs ACCESS LED For details on maintenance, contact your Sony dealer. Blinks blue when the HDDs are accessed. j Lock f HDD LEDs (1 to 8)
• Do not configure LAN connectors 1 and 2 to the Manuals and Technical same network segment. • For details on using iSCSI storage, contact your Documents Sony dealer. CAUTION Reference manuals and technical documents for the unit • For safety, do not connect the connector for are available online.
System Configuration The location at which the management server should be installed differs depending on the number of Network Video Recorder units that exist in the system. The recording server should always be installed on the unit. Note The management server is the core component of the Network Video Management System Enterprise Edition. This server processes and distributes the system configuration to the recording server and other system components and handles user authentication.
Multi Network Video Recorder Systems When configuring a system with two or more Network Video Recorders, install the management server on a computer separate from the Network Video Recorders. Use Management Client to configure settings for the recording servers on each Network Video Recorder, and use RAID Configuration Tool on each Network Video Recorder to configure RAID settings.
“Installing the Management Server on a Computer” Side (page 18). 410 mm (16 in.) When installing the unit on a rack, use the rack mount kit designed specifically for this unit. For details on the rack mount kit, contact your Sony dealer.
Installing without a Rack Step 2: Installing the Attach the provided rubber feet to the unit. HDDs Place the unit upright so that the bottom surface is visible. Then affix the adhesive surfaces of the rubber feet on the bottom of the unit as illustrated below. Note The unit will not operate without an HDD installed.
Page 15
Remove the dummy HDD from the tray, set the actual Reinsert the HDD lock removed in step 1. HDD into the tray in the direction illustrated, and secure it using the four HDD screws (+K, UNC × 5). Attach the front panel. Insert the four tabs on the front panel into the corresponding holes on the unit, and slide the panel to the left.
Note Step 3: Connections When using USB devices, be sure to read “Precautions for using USB devices” (page 5) in the “Usage Precautions” section beforehand. Connect each device to the unit. Connecting the Power Cord Connecting the Monitors Connect the power cord to the power supply connector. Connect the monitor to the monitor connector.
Connecting Other Devices Step 4: System Settings Connecting an audio output device This section describes how to turn on the power and the Connect the audio output device to the line output basic procedure for registering cameras and other connector. devices.
Select you country or region, time and currency, For details on purchasing additional licenses, contact keyboard layout, and click [Next]. your Sony dealer. Enter the user name and computer name that will be used for login, and click [Next]. Installing the Management Server...
The Network Video Recorder will restart Note automatically. You can proceed without entering the password here. In such cases, be sure to configure the password after initial setup for Windows is complete. For details, see Closing the Pagefile Wizard “Configuring the Login Password” (page 19). A page file is a file created to temporarily save the content of unused memory onto the HDD.
Click [Administrator]. Right-click the adapter you want to configure, and click [Properties]. The properties dialog box appears. Click [Create a password]. Select [Internet Protocol Version 4 (TCP/IPv4)], and click [Properties]. Enter a password, and click [Create password]. The [Internet Protocol Version 4 (TCP/IPv4) Enter the password twice for confirmation.
Click [OK]. Click [Next]. The settings are applied. Configuring dual display settings You can connect multiple monitors to the unit and use them as a single display. Be sure to connect the monitors beforehand. Right-click a blank area of the desktop, and click [Screen resolution].
• [Recording]: Install only the recording server onto Click [Setup]. the unit. Select this when configuring a system with The recording server installation dialog box appears. multiple Network Video Recorders. If you selected [All-In-One], proceed to the Select the language to use for the installer, and click “Installation in all-in-one mode”...
Configuration Tool. After creating the RAID array, create Changing the password a simple volume. Open [Home] - [Subsystems] - [localhost] - [Administrative Tools] in the RAID Configuration Caution Tool screen’s tree list, and click [User Management]. • This document describes settings for RAID5+ hot spare.
Page 24
Creating disk arrays For details, see “Step 2: Installing the HDDs” (page 14). Open [Home] - [Subsystems] - [localhost] in the RAID Configuration Tool screen’s tree list, and click [Disk Arrays]. Logging out of RAID Configuration Tool Click [Logout] in the RAID Configuration Tool Click the [Create] tab.
Verifying the version of the installed Device Pack Verify the latest version of Device Pack at the Click [Next]. following URL. Click [Next] again. https://www.sony.net/CameraSystem/NVMS/ Software Click the Start button ( ) on the left side of the taskbar. The Start menu appears.
[Authorize Recording Server]. Download the latest version of Device Pack from the following URL. https://www.sony.net/CameraSystem/NVMS/ Software Copy the downloaded Device Pack to a USB flash memory device. Connect the USB flash memory device to the unit.
Double-click [Recording]. Change the [Path] setting to “D:\Archive,” and click [OK]. The archive destination is added. Caution Change the [Path] setting to “D:\MediaDatabase,” and click [OK]. • Be sure to specify the RAID area as the path. Setting the path to the C drive may result in unstable operation.
Select [Express (recommended)], and click [Next]. Click for [Default camera group]. Note Note This section describes the express procedure only. Each device must belong to at least one group. Therefore, the IP addresses for the network cameras must be configured using the same segment as LAN Click to add a new camera group, and click [OK].
Step 5: Verifying Step 6: Activation Operation After registering cameras and configuring settings with the application, licenses must be activated. Install Smart Client on the computer connected to the unit to verify operation. For details on installation, refer to the NVMS Smart Client User Manual.
Before removing USB flash memory devices from the unit, be sure to right-click the target removable disk in Register license request files at the Sony license site, and Explorer and perform [Eject]. acquire activated software license files. For details, refer to the NVMS License Guide.
Step 7: Data Backup Third Party Software Terms and Conditions We recommend backing up your data so it can be restored if a hardware failure occurs, for example. This product may make use of third party software for which specific terms and conditions may For details on backing up data, refer to the NVMS apply.
Page 32
HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL Except where otherwise noted in the source code (e.g. the files hash.c, INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER list.c and the trio files, which are covered by a similar licence but RESULTING with different Copyright notices) all the files are: FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,...
Page 33
with the Work to which such Contribution(s) was submitted. If You To apply the Apache License to your work, attach the following institute patent litigation against any entity (including a boilerplate notice, with the fields enclosed by brackets "[]" cross-claim or counterclaim in a lawsuit) alleging that the Work replaced with your own identifying information.
Page 34
* Content-MD5 Code contributed by Martin Hamilton (martin@net.lut.ac.uk) that such works are identified as "derived from the RSA Data Security, Inc. MD5 Message-Digest Algorithm" in all material mentioning or referencing the derived work. RSA Data Security, Inc. makes no representations concerning either /* these portions extracted from mpack, John G.
Page 35
it "PHP Foo" or "phpfoo" # install - install a program, script, or datafile # This comes from X11R5 (mit/util/scripts/install.sh). 5. The PHP Group may publish revised and/or new versions of the license from time to time. Each version will be given a # Copyright 1991 by the Massachusetts Institute of Technology distinguishing version number.
Page 36
Redistribution and use in source and binary forms, with or without permission. modification, are permitted. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS There's ABSOLUTELY NO WARRANTY, express or implied. "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR It is my intent that you should be able to use this on your system, A PARTICULAR PURPOSE ARE DISCLAIMED.
Page 37
notice, this list of conditions and the following disclaimer. purpose with or without fee is hereby granted, provided that the above 2. Redistributions in binary form must reproduce the above copyright copyright notice and this permission notice appear in all copies. notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.
Page 38
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF http://www.usenix.org/events/usenix99/provos.html ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Some of the tricks in BF_ROUND might be inspired by Eric Young's ---------------------------------------------------------------------- Blowfish library (I can't be sure if I would think of something if I 1.
Page 39
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 10. ext/standard/scanf CONSEQUENTIAL scanf.c -- DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS This file contains the base code which implements sscanf and by extension OR SERVICES;...
Page 40
Redistribution and use in source and binary forms, with or without modification, Redistribution and use in source and binary forms, with or without are permitted provided that the following conditions are met: modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Page 41
We call this license the "Lesser" General Public License because it does Less to protect the user's 3. You may opt to apply the terms of the ordinary GNU General Public License instead of this freedom than the ordinary General Public License. It also provides other free software developers License to a given copy of the Library.
Page 42
8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS distribute the Library is void, and will automatically terminate your rights under this License.
Page 43
Group's free JPEG software. You are welcome to redistribute this software and No royalty is required, but we do ask for an acknowledgement in product to use it for any purpose, subject to the conditions under LEGAL ISSUES, below. documentation, as described under LEGAL ISSUES. Serious users of this software (particularly those incorporating it into larger programs) should contact IJG at jpeg-info@uunet.uu.net to be added to LEGAL ISSUES...
Page 44
Communications of the ACM, April 1991 (vol. 34 no. 4), pp. 30-44. with body (Adjacent articles in that issue discuss MPEG motion picture compression, send usenet/news.answers/jpeg-faq/part1 applications of JPEG, and related topics.) If you don't have the CACM issue send usenet/news.answers/jpeg-faq/part2 handy, a PostScript file containing a revised version of Wallace's article is available at ftp://ftp.uu.net/graphics/jpeg/wallace.ps.gz.
Page 45
this license for certain libraries in order to permit linking those 1. Redistributions of source code must retain the above copyright libraries into non-free programs. notice immediately at the beginning of the file, without modification, this list of conditions, and the following disclaimer. When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a 2.
Page 46
a) The modified work must itself be a software library. Otherwise, if the work is a derivative of the Library, you may b) You must cause the files modified to carry prominent notices distribute the object code for the work under the terms of Section 6. stating that you changed the files and the date of any change.
Page 47
Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying ====================================================================== the Library or works based on it. OCI8 10. Each time you redistribute the Library (or any work based on the -------------------------------------------------------------------- Library), the recipient automatically receives a license from the The PHP License, version 3.01...
Page 48
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR CONSEQUENTIAL PURPOSE * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS GOODS * OR SERVICES;...
Page 49
"This product includes PHP software, freely available from <http://www.php.net/software/>". Preamble THIS SOFTWARE IS PROVIDED BY THE PHP DEVELOPMENT TEAM ``AS IS'' AND The licenses for most software are designed to take away your ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, freedom to share and change it.
Page 50
modification follow. Pay close attention to the difference between a with the Library (or with a work based on the Library) on a volume of "work based on the library" and a "work that uses the library". The a storage or distribution medium does not bring the other work under former contains code derived from the library, whereas the latter must the scope of this License.
Page 51
interface-compatible with the version that the work was made with. This section is intended to make thoroughly clear what is believed to c) Accompany the work with a written offer, valid for at be a consequence of the rest of this License. least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more 12.
Page 52
Redistribution and use in source and binary forms, with or without <signature of Ty Coon>, 1 April 1990 modification, is permitted provided that the following conditions Ty Coon, President of Vice are met: That's all there is to it! 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
Page 53
notice, this list of conditions and the following disclaimer in the * This library is free for commercial and non-commercial use as long as documentation and/or other materials provided with the distribution. * the following conditions are aheared to. The following conditions * apply to all code found in this distribution, be it the RC4, RSA, * Neither the name of the glob nor the names of its contributors may * lhash, DES, etc., code;...
Page 54
themselves, then this License, and its terms, do not apply to those When we speak of free software, we are referring to freedom, not sections when you distribute them as separate works. But when you price. Our General Public Licenses are designed to make sure that you distribute the same sections as part of a whole which is a work based have the freedom to distribute copies of free software (and charge for on the Program, the distribution of the whole must be on the terms of...
Page 55
It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any This program is distributed in the hope that it will be useful, such claims; this section has the sole purpose of protecting the but WITHOUT ANY WARRANTY;...
Page 56
The precise terms and conditions for copying, distribution and an offer, in accord with Subsection b above.) modification follow. The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source GNU GENERAL PUBLIC LICENSE code means all the source code for all modules it contains, plus any TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION...
Page 57
10. If you wish to incorporate parts of the Program into other free proprietary programs. If your program is a subroutine library, you may programs whose distribution conditions are different, write to the author consider it more useful to permit linking proprietary applications with the to ask for permission.
Make sure that nothing is blocking the ventilation openings on the front, sides, and rear of the unit, and that Check the following items before contacting your Sony dust has not accumulated in them. dealer, and contact them if the problem persists.
Serial connector: RS-232C (1) EXPIRATION OF THE WARRANTY, OR FOR ANY OTHER REASON WHATSOEVER. Operating environment • SONY WILL NOT BE LIABLE FOR CLAIMS OF ANY KIND MADE BY USERS OF THIS UNIT OR Operating temperature MADE BY THIRD PARTIES.