Drum
The drum has 3 replaceable baffl es.
To remove the drum:
1. Remove the dryer front panel. (See
.)
Panel
2. Remove the drive belt from the motor. (See
.)
Belt
3. Pull the drum forward and guide it out of the
cabinet.
Drum Shaft and Bearing
The drum shaft is attached to the rear of the drum
with three T-20 Torx screws. The bearing can be
removed by pulling it off the shaft. The drum shaft
and bearing fi t into the bearing retainer in the
Dryer Front
center of the heater assembly (electric models) or
diffuser assembly (gas models).
Drive
To access the drum shaft and bearing, it is
necessary to remove the drum. (See
– 29 –
.)
Drum
Drum Shaft
Bearing