Status Of The Supply Voltage L+ Of The I/O Modules - Siemens IM 155-6 PN ST Manual

4.4

Status of the supply voltage L+ of the I/O modules

Introduction
The "Status of the supply voltage L+ of the I/O modules" is configured on the server module
as of IM 155-6 PN ST V1.1.x and GSD file 04/2013. The input data can then be read out on
the server module. You will find the relevant description in the Server module
(http://support.automation.siemens.com/WW/view/en/63257531) device manual.
Configurations
You can select two configurations for the IM 155-6 PN ST or the server module of the
IM 155-6 PN ST in the configuration software:
● Configuration without input data
● Configuration with input data
Input data
You can read out the status of the supply voltage L+ for each I/O module of the ET 200SP in
the input data (byte 0 to 3).
Figure 4-1
Note
An inserted or missing server module always signals "bit = 0" for the slot.
IM 155-6 PN ST interface module (6ES7155-6AU01-0BN0)
Manual, 04/2017, A5E03576904-AE
Status of the supply voltage L+
4.4 Status of the supply voltage L+ of the I/O modules
Parameters/address space
27