Lenovo ThinkSystem NE1032 Product Manual page 4

The front panel of the NE1032 RackSwitch includes the following components:
32x SFP/SFP+ ports to attach SFP/SFP+ transceivers for 1 Gb or 10 Gb Ethernet connections or
DAC cables and AOCs for 10 Gb Ethernet connections.
One RJ-45 10/100/1000 Mb Ethernet port for out-of-band management.
One Mini-USB RS-232 console port that provides another means to configure the switch.
One USB port for mass storage devices.
LEDs that display the status of the switch and the network.
Reset button.
Switch information pull-out tab.
The following figure shows the rear (non-port-side) panel of the NE1032 RackSwitch.
Figure 3. Rear panel of the NE1032 RackSwitch
The rear panel of the NE1032 RackSwitch includes the following components:
Two redundant hot-swap 770 W AC power supplies (each with the IEC 320-C14 power connector)
Three N+1 redundant hot-swap fan assemblies
Lenovo ThinkSystem NE1032 RackSwitch 4